The enclosed CD contains several remote interface example programs to
help you develop programs for your own application. Chapter 4, “Remote
Interface Reference”, lists the syntax for the SCPI (Standard Commands for
Programmable Instruments) commands available to program the function
generator.
Several example programs are given in the CD to demonstrate controlling
the Keysight 81150A / 81160A using SCPI commands. These example
programs are written in Microsoft® Visual BASIC® 6.0 and use the
Keysight VISA-COM objects for example, C sharp or VC++, examples are
also available.
The example programs given in the CD illustrate the use of several drivers
and environments. Also included is the “Keysight BenchLink Waveform
Builder for the 81150A / 81160A Waveform Generator”. For a detailed
description of these programs, refer to the “readme” file in the “Examples”
directory.
If you want to modify the example programs, or write your own programs
and compile them, you will need to install the Keysight E2094 I/O Libraries
software:
If you are using GPIB. The Keysight E2094 I/O Libraries software is
provided with Keysight GPIB I/O products. The software should have
been loaded when you installed your GPIB interface card in your PC.
If you are using USB or LAN. If you don’t have a copy, you can order
the Keysight E2094 I/O Libraries software on CD-ROM. You must
have version M (order Keysight product number E2094M) or a later
version to support USB and LAN.
To Next Page
Loading...
