Keysight 81160A - Page 128

Appendix
128
Front Panel
Operation
Press one of the trigger mode keys ( ., , or ) to display
the Trigger Mode Screen.
The settings above indicate that ‘Logical Trigger Signal 1’ is routed to Sync
A. ‘Logical Strobe Signal 1’ is routed to Sync B. Sync A and Sync B output
levels are set to TTL.
Remote Interface
Operation
:OUTput[1|2]:TRIGger:ROUTe[?] {NONE | SYNA | SYNB
| SYAB}
:OUTput[1|2]:STRobe:ROUTe[?] {NONE | SYNA | SYNB |
SYAB}