Keysight 81160A - Page 156

Appendix
156
Front Panel
Operation
 On the pattern mode screen press the Ext. Input Setup softkey.
 Press the Sample Mode softkey.
Remote Interface
Operation
:DIGital[1|2]:SOURce:EXTernal:SAMPling
{AUTO|FIXed}
Number of Levels
Introduction
Defines the number of levels that have to be detected in the provided
external pattern signal. Allowed values are 2 and 3 levels.
Front Panel
Operation
 On the pattern mode screen press the Ext. Input Setup softkey.
 Press the Number of Levels softkey.
 Enter the number of levels using the numerical keypad, or turn the rotary
knob to select the desired number of levels.
Remote Interface
Operation
:DIGital[1|2]:NLEVels{<number
of levels>|MINimum|MAXimum}