Keysight 81160A - Page 354

Appendix
354
Command
:BURS[1|2]:INT:PER[?]
Long
:BURSt[1|2]:INTernal:PERiod[?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the burst period for internally-triggered bursts. The burst period defines
the time from the start on one burst to the start of the next burst. It
corresponds with the :ARM:PERiod or :ARM:FREQ command.
Example
:BURS:INT:PER 10MHZ