Keysight 81160A - Page 419

Remote Programming Reference
81150A and 81160A User’s Guide 419
Command
:OUTP[1|2]:IMP[?]
Long
:OUTPut[1|2]:IMPedance[:INTernal][?]
Parameters
{<NR3>|MAXimum|MINimum}
Parameter Suffix
OHM
Description
It’s used to program the source impedance of the output connector.
 There are only two settings available. If you try to program any other
value, it will be rounded to one of the specified values, either 50 or
5.
Example
:OUTP2:IMP MAX