Keysight 81160A - Page 445

Remote Programming Reference
81150A and 81160A User’s Guide 445
Command
:FUNC[1|2]:PULS:TRAN:UNIT[?]
Long
[:SOURce]:FUNCtion[1|2]:PULSe:TRANsition:UNIT[?]
Parameters
{S|SEC|PCT}
Parameter Suffix

Description
Use this command to set the default units for the pulse transition-times. The
default unit is used when the parameter is programmed to a value without a
unit suffix.
Example
:FUNC2:PULS:TRAN:UNIT PCT