Keysight 81160A - Page 476

Appendix
476
Command
:MMEM:LOAD:STAT
Long
:MMEM:LOAD:STATe
Parameters
{1|2|3|4},“<file name>”[,“?:”]
Parameter Suffix

Description
To load a complete instrument setting (state) from a file “<file name>”
located in the current selected directory on the USB memory stick into non-
volatile memory in the instrument.
Load “FREQ_SWEEP” into storage location 2
:MMEM:LOAD:STAT 2,”FREQ_SWEEP”
Recall storage location <2> as current setting:
*RCL 2
Example
:MMEM:LOAD:STAT 1,”TEST_0012”