Keysight 81160A - Page 489

Remote Programming Reference
81150A and 81160A User’s Guide 489
Sweep Commands
Command
:FREQ[1|2]:CENT[?]
Long
[:SOURce]:FREQuency[1|2] [:CW|:FIXed]:CENTer[?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the center frequency (used in conjunction with the frequency span).
MIN = 1Hz, MAX = based on the frequency span and maximum frequency
for the selected function. The :FREQ[1|2]:CENT? query returns the
center frequency in Hertz.
Example
:FREQ2:CENT 5MHZ