Keysight 81160A - Page 503

Remote Programming Reference
81150A and 81160A User’s Guide 503
Command
:SYST:COMM:RLST
Long
:SYSTem:COMMunicate:RLSTate
Parameters
{LOCal|REMote|RWLock}
Parameter Suffix

Description
Set the remote/local state of the instrument over the LAN interface from a
Telnet or socket session. Provides control analogous to the IEEE-488.2
commands such as GTL (Go To Local) over the GPIB and USB interfaces.
 LOCal - (The default). Sets the instrument state to local. Removes
any annunciator and unlocks the front panel keyboard.
 REMote - Sets the instrument state to remote. Displays the remote
annunciator and locks the keyboard (except the <LOCAL> key).
 RWLock - Sets the instrument state to remote with lock. Displays the
rwl annunciator and locks the keyboard (including the <LOCAL> key).
Example
:SYST:COMM:RLST LOC