Keysight 81160A - Page 525

Remote Programming Reference
81150A and 81160A User’s Guide 525
Triggering Commands
Command
:ARM:FREQ[1|2][?]
Long
:ARM[:SEQuence[1]|[STARt][:LAYer[1]]:FREQuency[1|2
][:CW|:FIXed][?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Specifies the frequency of the internal trigger period generator of the
selected channel. To select the internal trigger generator use
:ARM:SOUR[1|2] INT2
Example
:ARM:FREQ2 10MHz