Front-Panel Menu Operation
81150A and 81160A User’s Guide 65
Press the AM Depth softkey and then set the value to 80% using the
numeric keypad or the knob and cursor keys.
Set the modulating
frequency
Press the AM Frequency softkey and then set the value to 200 Hz using the
numeric keypad or the knob and cursor keys.
Select the
modulating
waveform shape
Press More and then press the AM Shape softkey to select the shape of the
modulating waveform. For this example, select a sine wave.
At this point, the 81150A / 81160A outputs an AM waveform with the
specified modulation parameters (if the output is enabled).
To Next Page
Loading...
