Keysight 81160A - Page 86

Appendix
86
Set the “Subnet
Mask”
The subnet mask is required if your network has been divided into subnets.
Ask your network administrator whether a subnet mask is needed, and for
the correct mask. Press the Subnet Mask softkey and enter the subnet
mask in the IP address format (using the keypad).
Set the “Default
Gateway”
The gateway address is the address of a gateway, which is a device that
connects two networks. Ask your network administrator whether a gateway
is in use and for the correct address. Press the Default Gateway softkey and
enter the gateway address in the IP address format (using the keypad).
Exit the “IP Setup”
menu
Press Back to return to the "LAN" menu.