Keysight E4981A - Page 232

232 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Initial Settings
Initial Settings, Settings That Can Be Saved/recalled, Settings That Can Be Backed Up
-
External Controller
GPIB Address 17 No effect ] × ^
LAN setup
Fixed IP “196.168.1.101” No effect ] × ^
Fixed
Gateway
“0.0.0.0” No effect ] × ^
Fixed Subnet
mask
“255.255.255.0” No effect ] × ^
Auto IP AUTO No effect ] × ^
LAN status
Address - No effect ] ××
Gateway - No effect ] ××
Subnet Mask - No effect ] ××
MAC Address - No effect ] ××
Reconnect after reset to
factory state
No effect ] ××
Reconnection No effect ] ××
Socket port number 0 No effect ] ××
Internal Clock
Date - No effect ] ××
Time - No effect ] ××
Time zone 0 No effect ] × ^
1. In E4981A the signal monitor is always ON.
Table C-1 Initial settings, settings that can be saved/recalled, settings that can be backed up
Setting items
Initial settings
(factory settings)
Reset
Save/
Recall
Backup
Front panel key
(:SYST:PRES)
*RST