Keysight E4981A - Page 235

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 235
Error Messages
Error Messages (Alphabetical Order)
E
-123 Exponent too large
The absolute value of the exponent has exceeded 32,000. (Refer to
IEEE488.2,7.7.2.4.1.)
-170 Expression error
An error not included in the error numbers between -171 and -179 has
occurred during the syntax analysis of equation data.
-178 Expression data not allowed
An equation data element has been received where the E4981A does not
accept any equation data element.
-200 Execution error
A comprehensive execution error has occurred for which the E4981A cannot
detect further details. This error code simply indicates the occurrence of an
execution error that is defined in IEEE488.2,11.5.1.1.5.
F
1070 Fan failed
Cooling fan hardware failure is detected.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
G
-105 GET not allowed
A group execution trigger (GET) has been received in a program message.
(Refer to IEEE488.2,7.7.)
H
-114 Header suffix out of range
The header suffix is out of range.