Kikusui PWR401ML - CONFIG Shortcut Function; Registering CONFIG Shortcuts; Using CONFIG Shortcuts

72 PWR-01
CONFIG Shortcut function
There is a CONFIG shortcut function that allows up to three CONFIG parameters of your
choice (SC1, SC2, and SC3) to be registered. Registered CONFIG parameters can be
recalled with the SC key without having to enter the CONFIG menu.
Registering CONFIG shortcuts
1
Press CONFIG four times (CF30).
2
Turn the VOLTAGE knob to select the CONFIG parameter number (CF30,
CF31, or CF32) in which to register a shortcut.
CF30, CF31, and CF32 are assigned to SC1, SC2, and SC3, respectively.
3
Turn the CURRENT knob to set the CONFIG parameter number you want
to register.
4
Hold down CONFIG until the measured value display appears, or press
PWR DSPL.
The setting is are applied immediately.
Using CONFIG shortcuts
1
Press SHIFT+SC1, SC2, or SC3 in which the CONFIG parameter you want
to recall is registered.
The registered CONFIG parameter is displayed.
2
Hold down CONFIG until the measured value display appears, or press
PWR DSPL.
CV
CC
/ W
V
A
AL M RMT LOCK LAN
BCA
PRESET
DLY SEQ HBSSVIR
CV
CC
/ W
V
A
AL M RMT LOCK LAN
SC2 SC3 LOCKALM CLR SC1
SHIFT
FINE
FINE
REGULA TED DC POWER SUPPLY
OUTPUT
VOLTAGE
CURRENT
CONFIG PWR DSPLMEMORY LOCALSET OVP•OCP
Lit
CONFIG parameter number in
which to register a shortcut
CONFIG parameter number
you want to register
Example in which “CF21” is being
registered to the SC1 key
Example in which “CF21” is being
called with the SC1 key
CV
CC
/ W
V
A
AL M RMT LOCK LAN
BCA
PRESET
DLY SEQ HBSSVIR
CV
CC
/ W
V
A
AL M RMT LOCK LAN
SC2 SC3 LOCKALM CLR SC1
SHIFT
FINE
FINE
REGULA TED DC POWER SUPPLY
OUTPUT
VOLTAGE
CURRENT
CONFIG PWR DSPLMEMORY LOCALSET OVP•OCP
Lit