Matrix 2360 Programmable Shear User Manual - Section 1
2 12-092600 A
Optional back-up move to mitigate delamination
DC guillotine blade drive motor for quiet action and minimum vibration
Static electricity prevention
Material width setting changed easily without tools
Built-in operator safety features:
▪ Interlocked cover over guillotine blade and chute
▪ EPO (Emergency Power Off) switch
▪ Chute Interlock
▪ UL & CE approved wiring methods and components
Built-in testing features:
▪ Feed web while not operating the shear (JOG Button)
▪ Run the shear while not feeding web (CYCLE BLADE on OPTIONS
screen)
1.3 Options
Refer to Section 5.1.6 for details on these optional features.
Powered Roll Feed Module with Free Loop Sensor
Roll Support Spindle
Feature Registration for cuts based on a material feature
Reject Mark Detection with customized programming
Output Card Guide for guiding long strips or cards out over the chute.
Stretch model (The wide blade fits only on the Matrix™ 2360S model. The
entire machine is larger to accommodate the blade.)
Magnetic Exit Guide
Blade support fixture for accurately sharpening a 2360 blade. See
Section 7.5.1.
To Next Page
Loading...