Matrix 2360 Programmable Shear User Manual - Section 3
8 12-092600 A
Here are a few more rules to help ensure your safety:
1. Keep extremities, hair, clothing, jewelry, or other personal items that may be
caught up in the moving parts of the machine, away from those parts whenever
the machine is running.
2. Long hair should be tied back while operating or standing close to an operating
machine.
3. Do not wear loose clothing or dangling jewelry while operating or standing close
to an operating machine.
4. Do not insert any foreign object into the machine at any point.
5. Never operate the machine with any side panel removed. Removing side panels
will not turn machine or control power OFF.
6. When machine power is OFF, dangerous voltages are present within the
machine. Disconnect the machine from the AC power line before removing any
side panel.
CAUTION: Do not put anything into the machine except the
material to be processed. Foreign objects will damage the
machine and may cause dangerous flying metal fragments.
The following paragraphs describe additional safety features, processes, and
procedures to help ensure Operator safety and product quality.
3.1 Safety Systems
3.1.1 EPO (Emergency Power Off) Switch
A RED Emergency Power Off (EPO), mushroom style,
manual pushbutton switch is mounted on the top panel,
behind the guide rails. This pushbutton must be pulled
out to enable machine operation and may be pushed or
“slapped” to the “in” position to turn off control power and
stop the machine. In an emergency, push or slap this
button to the “in” position to cut power and stop the
machine. This type of button is also referred to as an E-
Stop.
To Next Page
Loading...