Matrix 2360 Programmable Shear User Manual - Section 2
6 12-092600 A
2.1 Special Symbols
NOTE: All Operators must read the safety tips highlighted as in
this example, and used throughout this manual. The symbols
provide information to assist in operation, care, and safe use of
the equipment.
The following examples show the symbols used, and the relative importance of the
information that accompanies the symbol. These information packages can save
you time, help you produce a quality product, and assist in the safe operation of the
equipment.
NOTE: The information symbol announces a useful bit of
information for system or operator convenience.
IMPORTANT: The exclamation point is sometimes used to draw
attention to important information, usually relating to policies or
unusual procedures. Some of this information may describe
situations and processes that could cause damage to the
equipment or produce defective product.
CAUTION: This identifies safety hazards and processes that
could cause physical injury to Operators or other personnel.
Please be careful.
ELECTRICAL HAZARD: This symbol warns of the dangers from
electrical shock that can cause physical injury or death.
Use extreme care in this area.
To Next Page
Loading...