Kinematic Matrix 2360 - Consumable Wear Parts and Blade Maintenance; Limitation of Liability

Matrix 2360 Programmable Shear User Manual - Section 9
88 12-092600 A
9 WARRANTY
Seller warrants that each item of its own manufacture delivered hereunder shall, at the time
of delivery and for a period of 36 months thereafter, be free from defects in materials and
workmanship. If any such item shall prove to be defective in material or workmanship under
normal intended usage and maintenance during the warranty period, upon examination by
Seller, then Seller shall repair or replace, at its sole option, such defective item at its own
expense; provided, however that the Customer shall be required to ship each such defective
item to Seller's plant.
The warranty on commercial components is limited to the warranty provided by the original
manufacturer of said components.
Any hardware or software modification made to the machine without Kinematic’s prior written
approval will void this warranty.
9.1 Consumable Wear Parts and Blade Maintenance
Consumable wear parts including (but not limited to) urethane drive rollers and vacuum pick
cups are not covered in the warranty. The Customer must expect these types of components
to have a limited lifespan and should replace them according to the maintenance schedule
provided with the machine documentation.
Blades (including Cut Modules, Shear Blades, and Die Blocks) are wear items, and will
become dull during use. Seller shall therefore not be responsible for repair or replacement of
blades unless, upon inspection, a module is found to be mechanically defective. Adhesive
and fibrous residue from materials being processed may build up on blades and other
surfaces over time. Seller makes no warranty as to the prevention of such residue.
9.2 Limitation of Liability
All warranties are expressly limited to the repair or replacement of defective items as set
forth herein. Except as provided for in the terms listed above, Seller shall in no event be
liable for any direct, indirect, or consequential damages or losses arising from delay, defects
in, or use of the machine. These damages include but are not limited to lost profits, lost
business or business opportunity, overhead expense, and third party liability.