Matrix 2360 Programmable Shear User Manual - Section 3
12 12-092600 A
Wear a protective mask to avoid breathing any dangerous fumes,
dust, or fibers from materials treated with any hazardous
substance. Refer to the MSDS for information about the chemicals
used in your process.
Wear a protective smock to avoid contamination of clothing from
chemicals, dust, or fibers from materials treated with any
hazardous substance. Refer to the MSDS for information about
the chemicals used in your process.
3.5 Residual Risks
Every effort has been made to reduce
risks and hazards and make this
equipment as safe as possible to operate.
A few residual risks cannot be completely
avoided for the equipment to function.
These risks are marked on the machine
and should be known to all personnel near
the equipment. check image for new blade
cover
SHEAR CUT HAZARD: The interlocked Lexan blade guard and is
designed to prevent access to the blade during operation.
Do not attempt to circumvent this safety feature.
There is a risk for Operators with small fingers if they attempt to
reach under the output chute safety bar.
Never put fingers or other objects near the blade during
operation.
This blade is very sharp.
Do not insert tools or other objects into the slot of the static control
bar. A painful but not hazardous shock (roughly equivalent to the
shock received from shuffling across a carpet, and then touching a
grounded metal object) can result.
To Next Page
Loading...