Kinematic Matrix 2360 - Cleaning the Blade; Sharpening the Guillotine Blade

Matrix 2360 Programmable Shear User Manual - Section 7
60 12-092600 A
7.4 Cleaning the Blade
Use a solvent suitable for dissolving and removing any adhesive or other residue
from the blade. Do not use any metallic scraper to remove the debris. Use only
cotton swabs, soft shop towels, and soft wood scrapers. Clean the areas indicated.
IMPORTANT: Before replacing the blade, it should be lubricated
as described in Section 7.10.
7.5 Sharpening the Guillotine Blade
Kinematic has designed a blade support fixture that will help to accurately sharpen a
2360 blade.
The fixture is designed
to securely support the
blade at the correct
angle for sharpening.
Observe the cutout for
the blade, and note that
the bolt secures the
blade to the fixture
through the blade coupling hole.
Blade Front
Blade Rear
old
model
new
model
Blade Sharpening Fixture