Matrix 2360 Programmable Shear User Manual - Section 8
12-092600 A 87
8 SPARE PARTS, DRAWINGS AND SCEHEMATICS
8.1 Spare Parts List
The spare parts list is a separate file in the documetation package. It is comprised
of parts that have one or more of these characteristics: a long lead-time, critical to
the operation of the machine, or may fail due to wear or damage.
Although there may be a large quantity of a certain component used in the assembly
of the equipment, there may be only one or two instances where this component
might be subject to wear or damage. Use all available information to assist in
determining how many of a particular part to stock at your facility. Stocking parts at
your facility is a management decision based on your experience and production
requirements.
Most of the commercially available listed parts may be procured locally from a
distributor or directly from the manufacturer. Kinematic does not maintain a stock of
components, either electrical or mechanical. Parts listed without related
manufacturer information either are manufactured at Kinematic or are modified at
Kinematic specifically for the equipment application. These must be ordered from
Kinematic. See the terms of the warranty for further details on how replacement
parts can affect your warranty.
In an emergency, contact Kinematic to see if we might have a critical part available.
Sometimes while we are building equipment, and depending on our production
schedule, we may be able to make a part from that equipment available for your
equipment. We will make every effort to help limited only by possible schedule
conflicts or other factors.
8.2 Bill of Materials
A Bill of Materials is included as a separate file in the documetation package.
8.3 Assembly Drawings & Schematics
The Assembly Drawings and Schematics are to assist in any maintenance that may
be needed.
To Next Page
Loading...