12-092600 A
Revision A
September 2020
Matrix™ 2360 Programmable Shear User Manual
Proprietary Notice and Liability Disclaimer
Kinematic reserves protectable proprietary rights, including patent rights, rights to
devices originated by us which are part of the equipment, and rights to designs or
data proposed or furnished. We disclaim any warranty against inadvertent violation
of existing patent rights in the equipment furnished.
All drawings, designs, specifications, inventions, devices, processes, provided in this
document will remain the property of Kinematic and will be kept confidential by
Customer. Customer shall have no claim to, license or ownership of, any intellectual
property provided to them by Kinematic. This intellectual property and/or
confidential information may not be copied, disclosed to others, or used for the
purpose of component fabrication without the prior written consent of Kinematic
Automation. Customer agrees to return all copies of intellectual property to Seller
upon receipt of a written request for their return from the Seller.
To allow for design and specification improvements, the information in this document
is subject to change at any time, without notice.
is a trademark of Kinematic Automation, Inc.
Other trademarks, service marks, and trade names may be used in these pages to
refer to the entities claiming those marks and/or names. Kinematic Automation, Inc.
disclaims any proprietary interest in the trademarks owned by others and makes no
representation of any association with the owners of said trademarks.
Documentation is provided "as is" and all express or implied conditions,
representations and warranties, including any implied warranty of merchantability,
fitness for a particular purpose or non-infringement, are disclaimed, except to the
extent that such disclaimers are held to be legally invalid.
RESTRICTED RIGHTS: Use, duplication, or disclosure by the U.S. Government is
subject to restrictions of FAR 52.22714(g)(2)(6/87) and FAR 52.227-19(6/87), or
DFAR 252.227-7015(b)(6/95) and DFAR 227.7202-3(a).
To Next Page
Loading...