11.8 Ethernet cable
Connection to an Ethernet network is possible via two RJ45 connectors in the servo amp-
lifiers.
These cables can be used for all fieldbus connections with standard RJ45 connectors like
EtherCAT, PROFINET, SynqNet and also for the EtherNet TCP/IP Service Port connection
of an AKDservo amplifier.
11.8.1 Order codes Ethernet cable, configured
Article Length Order code
Ethernet cable 0.17 m ENCP-0017-000
Ethernet cable 0.26 m ENCP-0026-000
Ethernet cable 0.30 m ENCP-0030-000
Ethernet cable 0.50 m ENCP-0050-000
Ethernet cable 1.00 m ENCP-0100-000
Ethernet cable 2.00 m ENCP-0200-000
Ethernet cable 3.00 m ENCP-0300-000
Ethernet cable 4.00 m ENCP-0400-000
Ethernet cable 5.00 m ENCP-0500-000
Ethernet cable 10.00 m ENCP-1000-000
Accessories Europe | 11 Cables
Kollmorgen | December 2014 59
To Next Page
Loading...
