Accessories Europe | 11 Cables
11.11 Motor cables
11.11.1 General
Standard versions of Kollmorgen motors have either one connector or one terminal box for
the power connection. Optional connection types are described in the relevant motor manual.
Motor series Power Connection Motor series Power Connection
AKM1...8 =< 22A Connector size 1 Cartridge DDR =< 22A Connector size 1
AKM7...8 > 22A Connector size 1.5 Cartridge DDR > 22A Connector size 1.5
AKM8 Terminal box DBL1...6 / DBK1...4 Connector size 1
AKMH2...6 Connector size 1 DBL7...8 Terminal box
VLM2...6 Connector size 1
Depending on their power ratings, Kollmorgen servo amplifiers are equipped with connectors
or fixed screw terminals.
Technical data of the used cable material can be found our Technical WIKI (Cables).
11.11.2 Motor cables, configured
The cables differ in respect of how they are connected to the amplifier. There are major dif-
ferences in connection method due to the varying requirements in respect of minimum code
distances, different shielding concepts depending on rated voltage and current load. Our pre-
assembled ready-to-use cables meet the requirements of relevant CE and UL directives.
Different conductor cross-sections are required for different motors, and that for motors with
a holding brake the brake signals are also attached through this connector.
Connections standard motor connectors
The view is as seen from the contact side of the mating connector.
Standard (size 1). wire max 4mm² Option H (size 1.5). wire max. 10mm²
Pin Signal Pin Signal Pin Signal Pin Signal
1 U2 A + Br U U2 + + Br
4 V2 B - Br V V2 - - Br
3 W2 C n.c. W W2 1
Option
J only
PE (2) PE D n.c. PE PE 2
Option
J only
Material list
Part Designation Order Code
Cable Overview (➜ p. 45)
Connector kit (motor end) Size 1.0 EMC Connector 8 poles, size 1.0 DE-92175
Washdown connector kit (motor end)
Size 1.0
EMC Connector 8 poles, size 1.0.
stainless steel
DE-201810
Connector kit (motor end) Size 1.5 EMC Connector 6 poles, size 1.5 DE-201601
66 Kollmorgen | December 2014
To Next Page
Loading...
Need help?
General
