13-23
[6] Paper Type / Special Size Set
Use this function to indicate a specific paper type or to specify a special paper size for
each tray key on the Basic Screen. This is especially useful when special paper is used
on a regular basis and is always placed in a specific paper tray.
Key Operator Mode Screen Paper Type Setting Screen
Special Size Setting Screen (STD size)
Special Size Setting Screen (STD size (special))
Special Size Setting Screen (Non STD size) Special Size Setting Screen (Wide size (select))
Special Size Setting Screen (Wide size (input)
Procedure
1 Touch [6] Paper type / Special size set on the Key Operator Mode Screen to display
the Paper Type Setting Screen.
2 To specify paper type;
(1) Touch the desired paper tray key to highlight it.
(2) Touch the arrow keys to select paper type.
To specify special size;
(1) Touch Special size setting on the Paper Type Setting Screen to display the Special
Size Setting Screen.
(2) Touch the desired paper tray to highlight it.
(3) Touch a paper size key to specify a paper size for the selected tray.
13
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
Centring
Adjustment
Timing
Adjustment
HDD
Management
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode
To Next Page