Konica Minolta 7085 - M Aking Double-Sided Copies (1 2, 2 2); Making Double-Sided Copies (1 2, 2 2); Output Without; Using RADF

3-21
Making Double-Sided Copies (1  2, 2  2)
The Basic Screen is initially set to 11 copy mode to make single-sided copies from
single-sided originals.
Follow the procedure below to make double-sided copies from the originals scanned
from the document feeder or from the platen glass.
Using RADF
Select the copy mode according to the original type (single-sided or double-sided).
1. Touch 12 or 22 on the Basic Screen to highlight it.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Double-sided original
Duplex copy
Duplex copy
Single-sided original
2-2 Copying
1-2 Copying
Front
Front
Front
Front
Front
Back
Back
Back
Back
Back
Front
Front
Front
Front
Front
Back Back Back
Front
Front
Front
Front
Front
Back Back Back
Front
Front
Front
Front
Front
Back Back Back
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode