Loading Paper (continued)
2-24
4. Move the green levers (located at the front and the left side) to the
edge of the paper.
Release the release knob to lock the side guide plate.
Reminder!
• Be sure that the rear guide plate is securely aligned to the paper;
otherwise machine trouble may occur.
• Be sure that the green levers are securely aligned to the paper;
otherwise the machine cannot detect the correct paper size, or copies
may not be punched in position.
5. When paper is seated properly, close the paper feed roller.
6. Push in the tray until it locks into place.
The indicator “” on the tray key will change to “”.
Reminder!
Do not bump the tray into the main body; otherwise machine trouble may
be caused.
To Next Page