54
Song Play
Selecting a Song to play
2 Touch the Sequencer 1 area to open the Song Select window.
Hint: As an alterna-
tive, you can open the
Song Select window by
pressing the SELECT but-
ton in the SEQUENCER 1
section on the control
panel.
3 Scroll through the list and select the Song to play.
4 When the Song is selected, touch the Select button to confirm your selec-
tion, and close the Song Select window.
i
SELECT << >>
SEQUENCER 1
SELECT <<
S
The selected Song is highlighted.
Touch a Song’s name to select it.
Use the scroll bar to see all Songs
in the list. Keep SHIFT pressed
and touch the Up/Down arrow
to scroll to the next/previous
alphabetic section. As an alter-
native, you can use the DIAL.
Use the Open and Close buttons
to browse through the folders.
Use the Device pop-up menu to select
one of the available mass-storage
devices (SSD-U, hard drive…).
Use the Sync P. (Synchronized Path)
button to see the selected Song again.
Touch the Select button to select the
highlighted Song, and assign it to
Sequencer 1.
After touching the Select button in the dis-
play, the main page of the Song Play mode
appears again.
Selected Song
To Next Page
Loading...
Need help?
General
