Kyocera FS-1030D - Page 14

2G6
1-1-2
Controller software ......................... a) Emulation
PCL6 (PCL5e + PCLXL)
KPDL3 (PostScript 3 compatible)
b) Fonts:
Bitmap font:
1 Line Printer bitmap font
Outline fonts:
35 PCL6 (PCL5e/PCL-XL) fonts
45 KPDL2 fonts:
c) Graphic:
(1) Raster graphic:
75, 100, 150, 200*, 300, 600* dpi
(*200 dpi is supported when the resolution is 600 dpi.)
(2) Vector graphic:
Line, Box, Circle, Arc, Fill pattern etc.
(3) Bar code:
One-dimensional bar code: 45 types
Two-dimensional bar code: 1 type (PDF-417)
d) Connectivity
Plug & play, Windows 95/98/Me/NT4.0/2000/XP
Interface ......................................... Parallel: Hi-speed (bi-directional), IEEE 1284 Nibble/ECP mode
USB: Full-Speed USB2.0
Optional interface (KUIO-LV) × 1: Network interface card IB-21E (10 Base-T/100
Base-TX) must be installed.
Optional serial interface: RS-232C (Max. 115.2 Kbps), Serial interface board IB-11
must be installed.
Dimensions (W) × (D) × (H) ........... 378 × 235 × 375 mm
14.9" × 9.3" × 14.8"
Weight ............................................ Approx. 10.5 kg/23.2 lbs
Power source ................................. 110 V AC, 60 Hz, 6.5 A
120 V AC, 60 Hz, 7.1 A
220 - 240 V AC, 50/60 Hz, 3.8 A
Power consumption ....................... Max.: 819 W
During sleep mode: 4.4 W (110 V AC), 4.5 W (120 V AC), 4.3 W (220 - 240 V AC)
Noise .............................................. During printing: LpA = 65 dB (A)
During standby: LpA = 30 dB (A)
During sleep mode: Immeasurably low
Options........................................... Paper feeder, Additional memory (DIMM), Memory card, Network interface card IB-
21E, Serial interface board IB-11