Kyocera FS-1030D Service Manual

Check that the power cable covering is free of damage. Check that the power plug is dust-free. If it
is dirty, clean it to remove the risk of fire or electric shock. ...............................................................
Never attempt to disassemble the optical unit in machines using lasers. Leaking laser light may
damage eyesight. .............................................................................................................................
Handle the charger sections with care. They are charged to high potentials and may cause electric
shock if handled improperly. .............................................................................................................
CAUTION
Wear safe clothing. If wearing loose clothing or accessories such as ties, make sure they are
safely secured so they will not be caught in rotating sections. ..........................................................
Use utmost caution when working on a powered machine. Keep away from chains and belts. ........
Handle the fixing section with care to avoid burns as it can be extremely hot. ..................................
Check that the fixing unit thermistor, heat and press rollers are clean. Dirt on them can cause
abnormally high temperatures. .........................................................................................................
Do not remove the ozone filter, if any, from the printer except for routine replacement. ...................
2. Precautions for Maintenance
WARNING
Always remove the power plug from the wall outlet before starting machine disassembly................
Always follow the procedures for maintenance described in the service manual and other related
brochures. ........................................................................................................................................
Under no circumstances attempt to bypass or disable safety features including safety mechanisms
and protective circuits. ......................................................................................................................
Always use parts having the correct specifications. ..........................................................................
Always use the thermostat or thermal fuse specified in the service manual or other related
brochure when replacing them. Using a piece of wire, for example, could lead to fire or other
serious accident. ..............................................................................................................................
When the service manual or other serious brochure specifies a distance or gap for installation of a
part, always use the correct scale and measure carefully.................................................................
Always check that the printer is correctly connected to an outlet with a ground connection. .............

Kyocera FS-1030D Specifications

General

Processor model	PowerPC 405
Built-in processor	Yes
Maximum internal memory	288 MB
Sound power level (standby)	28 dB
Sound pressure level (printing)	53 dB
Color	No
Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	22 ppm
Maximum print size	210 x 297 mm
Media weight (tray 1)	60-105 g/m2
Maximum ISO A-series paper size	A4
Memory upgrade	Yes GB
Custom media sizes	(148 x 210mm) - (216 x 356mm)
Power requirements	220 - 240V, 50/60Hz
Standard media sizes	A4, A5, B5, Letter, Legal
Total output capacity	250 sheets
Maximum input capacity	550 sheets
Paper tray 2 input capacity	50 sheets
Maximum duty cycle	20000 pages per month
Number of print cartridges	1
Power consumption (standby)	8.4 W
Power consumption (printing)	370 W
Power consumption (PowerSave)	4.3 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	378 x 375 x 235 mm