Fax Operation (Advanced) 3-41
3 Use the numeric keys to enter the fax number of the transmitting
party.
4 Press the [Subadd.] key.
5 Press the [On] key.
6 Use the numeric keys to enter the appropriate subaddress.
7 Press the [Password] key.
8 If necessary, use the numeric keys to enter the predetermined F-
Code password.
9 Press the [Close] key. The message display will return to the same
screen as was displayed in step 3. You can now change any
transmission settings that you want or set the time for the
transmission to begin. You can additionally select another
transmitting fax to receive documents from.
10Press the Start key. The reception operation will begin.
FREE
Enter Destination.
RX Polling.
book
Address
Abbrev.
Delete
SpacePause
ABC
Dest .0
destinat.
Next
Note You can also enter the fax number using one-touch keys
that have been designated for F-Code Based Communication
as well. If you do use such a one-touch key, press the Start
key and the reception operation will begin automatically.
Subaddress TX
Off
_.
Enter using # key.
On
Ba
Subaddress
Password
RX Polling.
Dele
Note This subaddress is required during an F-Code Based
Communication in order to designate the box in the destination
party's fax. It can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols * and #.
You can use the [] and/or [] keys to move the cursor to a
desired location, and you can clear the entered number by
pressing the [Delete] key.
Note The password can be up to 20 digits in length and can
include any combination of the numerals 0 - 9 and the symbols
* and #.
This password is not required if you agree in advance with the
destination party not to use one.
To Next Page
Loading...
