Kyocera KM-2540 - Page 119

Fax Operation (Advanced) 3-59
1 Press the [Register] key. The Register screen will appear.
2 Press the [Dial] key.
3 Press the speed-dial key (program key) containing the information
you want to modify or delete.
4 If you want to delete the registered program key, press the [Delete]
key and then go to the next step. If you want to modify the registered
information, press the [Change contents] key and then go directly to
step 6.
> Deleting a program key
5 Press the [Yes] key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue deleting other program keys, repeat steps 3
through 5. If you are finished deleting program keys, press the Reset
key.
> Modifying registered information
6 If you want to change the destination fax number(s), press the []
key and go to the next step. If you want to modify the abbreviated
number (the displayed number of the speed-dial key under which the
program key is registered), press the [Abbr. #] key and then go
directly to step 16. If you want to modify any other basic information,
press the key that corresponds to that information and refer to
Registering New Program Keys on page 3-57.
Deleting destinations
7 Press the destination that you want to delete until it is highlighted.
Multiple selections are possible. If the destination you want to delete
is not displayed, use the [T] and/or [S] cursor keys to switch to the
screen that displays the destination that you want.
8 To delete the selected destination(s), press the [Delete] key and then
the [Yes] key.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
Note If that key is not displayed, use the [T] and/or [S] cursor
keys to switch to the screen that displays the key that you
want.
Contents change/del.
Change
contents
Ba
Register the dial.
Program Dial(Send)
Delete
002.
Name
0006.
GDE
0001.
Add/change/del des. Ba
Register the dial.
Program Dial(Send)
ABC
FREE + 1236546.
1/1.
0003.
03.
0006.