Kyocera KM-2540 - Page 120

3-60 Fax Operation (Advanced)
Adding destinations
9 Press the [Add] key.
10Enter the additional fax number(s).
11Once you are finished entering all of the fax numbers that you want,
press the [Finish dest. Set] ([Dest. set]) key.
Changing destinations
12Select one destination to be changed, and then press the [Change]
key.
13Enter the new fax number.
You can enter the fax number using the numeric keys, abbreviated
numbers, one-touch keys and the address book. Chain dial keys can
be used as well.
14Press the [Finish dest. Set] ([Dest. set]) key.
15Press the [Close] key.
Once you are finished making all of the modification that you want,
go directly to step 18.
16Enter the abbreviated number of an unregistered speed-dial key
(0001 - 1000).
17Press the [Close] key.
18Once you are finished modifying all of the items that you want, press
the [OK] key. The message display will return to the same screen as
was displayed in step 3.
If you want to continue modifying other program keys, repeat steps 3
through 18. If you are finished deleting program keys, press the
Reset key.
CloseBack
Change
Add
Delete
Memory usage:
JUN-06-2007 16:00
3
6546.
1/1.
03.
.0%
0
6.
FREE
Program Dial(Send)
Enter Destination.
Register the dial.
book
Address
Abbrev.
Delete
SpacePause
FREE + 123568_.
CDEABC
GDE
0006.
destinat.
Next
Dest 1
Note You can enter the fax number(s) using the numeric
keys, one-touch keys and the address book. Chain dial keys
can be used as well.
If you want to enter multiple fax numbers with the numeric
keys, press the [Next destinat.] ([Next dest.]) key after each
fax number.
CloseBack
Change
Add
Delete
Memory usage:
JUN-06-2007 16:00
3
6546.
1/1.
03.
.0%
0
6.
( 4 digits)
Enter using # key.
Abbreviation Ba
Register the dial.
Program Dial(Send)
0006.
0006.
Note Once a 4-digit number is entered, that number may be
changed using the [+] and [-] keys.