Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax) 1-13
When the Dual Access function is not available
There are cases in which the Dual Access function is not available. For
example, during a fax communication to one party, you will not be able to
receive a fax from another party, nor can you perform setting or
registration procedures during any fax transmission or reception.
In such cases, perform the desired operation after the current
communication is completed.
Refer to Table of Operations Available/ Unavailable under Dual Access
on page 1-13, for more detailed information regarding which operations
can and cannot be performed simultaneously.
Table of Operations Available/ Unavailable under Dual Access
Y: The additional operation will work unconditionally with the initial
operation.
Note Communications that use the timer will not be
accomplished, even upon reaching the designated time for the
communication to begin, until the current operation has been
completed.
Additional operation
FAX Copier Printer
Direct Feed Transmission
(during scanning or transmission)
Memory Transmission
(during scanning)
Memory Transmission
(during transmission)
Memory Reception
(during reception)
Memory Reception
(during printing)
Standard Copying
(during scanning or printing)
Memory Copying
(during scanning)
Memory Copying
(during printing)
Spooling
Printing
Initial operation
FAX
Direct Feed Transmission
(during scanning or transmission)
NNNNNNNYY
Memory Transmission
(during scanning)
N YYNNNNYY
Memory Transmission
(during transmission)
NY NNYYYYY
Memory Reception
(during reception)
NYN NYYYYY
Memory Reception
(during printing)
YYYY NNNYN
Copier
Standard Copying
(during scanning or printing)
NNYYN NNYN
Memory Copying
(during scanning)
NNYYNN NYN
Memory Copying
(during printing)
NNYYNNN YN
Printer
Spooling
YYYYNYYY Y
Printing
YYYYNNNNY
To Next Page
Loading...
