2-6 Fax Operation (Basic)
2 Select the desired resolution from among the 5 available.
6 Selecting the density
It is possible to select a density from among the 3 available settings.
1 If you want to change the density, press the [Density Mode] key.
2 Select the desired density from among the 3 available.
7 Indicating the document size
When you set any documents that you want to transmit on the
platen, you will need to indicate the size of those documents.
This procedure is not necessary when transmitting documents from
the Document Processor.
Original Image
Normal
Fine
Ultra fine
Ready for fax transmission.
Super fine
Half tone
Note The Fine and Super fine resolutions reproduce
clearer images in comparison to transmission with the
Normal resolution, but transmission time is longer.
The Half tone [Half-tone] resolution reproduces grays
clearly, but transmission time is longer than with the
Normal or Fine resolutions.
To transmit with the Ultra fine resolution, 32 MB of
optional memory must be installed. If the additional
memory is NOT installed, the Ultra fine resolution will not
selectable.
To transmit with the Super fine or Ultra fine resolutions,
the receiving fax must have the corresponding resolution
capabilities in order to benefit from their features. If the
receiving fax does not have the corresponding capability,
transmission will be accomplished with the Fine
resolution.
Density Description
Dark For transmitting light documents at a darker
contrast.
Regular For transmitting document with a normal contrast.
Light For transmitting dark documents at a lighter
contrast.
Note The default setting is for Regular density.
To Next Page
Loading...
