Kyocera KM-2540 - Page 39

Fax Operation (Basic) 2-7
1 In order to indicate the document size, press the [Original Size]
key.
2 Select the appropriate document size.
8 Initiating the fax transmission
Press the Start key. The transmission operation will begin
automatically.
> Checking the status of the transmission...
Press the [Status] ([Act status]) key in the bottom right of the touch
panel. The document number and information related to the other
party will be displayed.
> Stopping the transmission in progress
It is possible to cancel the ongoing operation by pressing the [Stop]
key in the confirmation screen that was accessed above. Press the
[Close] key to return to the previous screen.
Press start key to transmit
Dest
Ready for fax transmission.
Basic Application
DuplexAddress
Register
TXbook
Print Report
1234_.
Abbrev.
One touch
destinat.
Delayed TX
Original
Size
Original
Image
De
Mo
8½×11" Normal
R
Delete SpacePause Subadd.
Original size
8½x14"
8½x11"
Ready for fax transmission.
11x8½"
11x17"
8½x5½"
5½x8½"
Note You can select or change the resolution or density
during scanning.
i
gn destination.
.0%
x
transmission.
t
ion Register
Re-dial
On-hook
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
JUN-06-2007 16:00
TX
setting
Status
Status of Fax
Stop
Check Status of Fax
020.
Port
Doc #:
Dialing.
03.
Pri
n