80 Flowmaster User’s and Service Manual | LBL-000990 [B] Appendix A
The power cable connected to the flowsensor has a
connector with locking mechanism. Do not attempt
disconnection by pulling the cable. Loosen the lock by
pressing the lever on top of the connector.
The computer and its peripherals connected to the
flowsensor must comply with the IEC 60950 and/or
UL 1950.
Never use another power supply other than the Laborie
one.
Do not drop or throw the flowsensor. Do not apply
excessive force on the flowsensor (maximum 3.5 kg) or
let things drop on the flowsensor. This can permanently
damage the flowsensor.
Avoid touching or kicking the flowsensor during an
investigation.
Do not try to remove the flowsensor top-plate by pulling or
screwing the top-plate.
After low battery indication, exchange the batteries within
30 minutes.
Remove the batteries when the flowsensor is not used for
a longer period (more than 3 months).
Environmental conditions (i.e. thick walls/doors, iron in
walls/doors) may compromise the Bluetooth connection of
the flowsensor and battery lifetime.
To Next Page
Loading...
