Regenerave modules
For feeding energy from the DC bus of a drive system back into a 3-phase AC system
r750 r
egenerave module
Device features:
•
Self-synchronizing with the AC system
•
Automac operaon
-
Self-opmizing
-
Self-parameterizing
-
No parameterizaon of operang condions required
•
Scaling of the regenerave power by parallel operaon of further regenerave modules of
this series
•
Controlling power peaks by parallel operaon of a brake chopper is possible
•
High peak regenerave power
•
High eciency
•
Operaon without external lters possible
•
Polarity reversal protecon of the device is integrated in the DC-bus connecon.
•
Operaon without external supply voltage
-
Direct supply from the DC bus or from the AC system
•
Measured value via the regenerated energy
Further in
formaon can be found in the mounng and switch-on instrucons
for the r750 regenerave module.
Accessories
R
egenerave modules
165