Lenze i750 - Connection Data

Connecon dat
a
Single axis i750-C1.1/400-3 ... i750-C15/400-3
Double axis i750-C1.1/400-3/2 ... i750-C7.5/400-3/2
Connecon descripon DC connecon
Connecon X101
T
erminal type Busbar system
Tightening torque Nm 5
Tightening torque lb-in 44.3
Required tool Crossp screwdriver PH3
Single axis i750-C1.1/400-3 ... i750-C4/400-3 i750-C7.5/400-3 ... i750-C15/400-3
Double axis i750-C1.1/400-3/2 ... i750-C7.5/400-3/2
Connecon descripon Motor connecon Mot
or connecon
Connecon X105 X105
Terminal type Screw terminal Screw terminal
Max. Cable cross-secon mm² 4 16
Max. Cable cross-secon AWG 12 6
Min. Cable cross-secon mm² 0.25 0.5
Min. Cable cross-secon AWG 24 20
Stripping length mm 8 12
Stripping length in 0.3 0.5
Tightening torque Nm 0.5 1.5
Tightening torque lb-in 4.4 13.3
Required tool Screwdriver 0.6 x 3.5 Screwdriver 1.0 x 5.5
Single axis i750-C1.1/400-3 ... i750-C15/400-3
Double axis i750-C1.1/400-3/2 ... i750-C7.5/400-3/2
Connecon descripon PE connecon
Connecon S
ymbol Schutzerde (PE)
Terminal type Busbar system
Tightening torque Nm 2.5
Tightening torque lb-in 22.1
Required tool Crossp screwdriver PH2
Technical data
3-phase mains connecon 480 V
Ax
es data
94