EasyManua.ls Logo

Lexmark X642e - Page 69

Lexmark X642e
525 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-31
7002-xxx
927 .07 Main fan capture data is
invalid and speed
control is at maximum in
fan control adjustment
state.
Corrupted feedback signal. Go to “Main fan service check” on
page 2-119.
929 .00 Toner sensor errora
problem has been
detected with the toner
sensor.
Check the toner sensor
Check cable
Check system board
Go to “Toner sensor service
check” on page 2-171.
929 .66 An error has been
detected. No home
windows has been
detected.
Check toner cartridge.
Check toner sensor
Go to “Toner sensor service
check” on page 2-171.
929 .67 No toner sensor
transition.
Check toner sensor
Check toner cartridge
Go to “Toner sensor service
check” on page 2-171.
930 .00 An incorrect printhead
has been detected
Check the printhead Go to “Printhead service check”
on page 2-165.
932 .00 Printhead lost HSYNC. Check printhead
Check cables and connections
Check system board
Go to “Printhead service check”
on page 2-165.
933 .00 Mirror motor locked, no
first HSYNC received.
Check printhead
Check cables and connectors
Check system board.
Go to “Printhead service check”
on page 2-165.
934 .00 Mirror motor lost lock Check printhead
Check cables and connections
Check system board
Go to “Printhead service check”
on page 2-165.
936 .00 Mirror moor not up to
speed
Check printhead
Check system board
Go to “Printhead service check”
on page 2-165.
936 .10 No hall effect detected
at motor start. Motor is
type 0.
Check cable connections
Defective motor
Severe gear blinds in gearbox
assembly
System board
Go to “Main drive service check”
on page 2-153.
936 .11 No hall effect detected
at motor start. Motor is
type 1.
Check cable connections
Defective motor
Severe gear binds in gearbox
assembly.
System board
Go to “Main drive service check”
on page 2-153.
936 .20 Failed to stop within
timeout, motor is type 0.
Defective motor
Defective system board
Go to “Main drive service check”
on page 2-153.
936 .21 Failed to stop within
timeout, motor is type 1.
Defective motor
Defective system board
Go to “Main drive service check”
on page 2-153.
Service error codes (9xx.xx) (continued)
Error
code
Sub
codes
Display text Description Action

Table of Contents

Other manuals for Lexmark X642e

Related product manuals