EasyManua.ls Logo

Lexmark X642e - Page 70

Lexmark X642e
525 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-32 Service Manual
7002-xxx
936 .30 No lock detected at
motor start for motor ID.
Motor is type 0.
Check for paper jams
Gear binds
Defective motor
Check motor cable and
connections
Go to “Main drive service check”
on page 2-153.
936 .31 No lock detected at
motor start for motor ID.
Motor is type 1.
Check for paper jams
Gear binds
Defective motor
Check motor cable and
connections
Go to “Main drive service check”
on page 2-153.
936 .60 No lock detected at
normal motor start.
Motor is type 0.
Check for paper jams
Gear binds
Defective motor
Check motor cable and
connections
Go to “Main drive service check”
on page 2-153.
936 .61 No lock detected at
normal motor start.
Motor is type 1.
Check for paper jams
Gear binds
Defective motor.
Defective motor cable
Cable connections
Go to “Main drive service check”
on page 2-153.
936 .9 Stall detected during
speed control. Motor is
type 0.
Defective cable
Check cable connections
Defective motor
Paper jams
Go to “Main drive service check”
on page 2-153.
936 .91 Stall detected during
speed control. Motor is
type 1.
Defective cable
Check cable connections
Defective motor
Paper jams
Go to “Main drive service check”
on page 2-153.
937 .4 Overspeed detected
during speed control.
Motor is type 0.
Faulty motor sensor
Faulty system board
Go to “Main drive service check”
on page 2-153.
937 .41 Overspeed detected
during speed control.
Motor is type 1.
Faulty motor sensor
Faulty system board
Go to “Main drive service check”
on page 2-153.
937 .5 Overspeed detected
during position control.
Motor is type 0.
Faulty motor sensor
Faulty system board
Go to “Main drive service check”
on page 2-153.
937 .51 Overspeed detected
during position control.
Motor is type 1.
Faulty motor sensor
Faulty system board
Go to “Main drive service check”
on page 2-153.
937 .7 Loss of lock detected by
higher level code. Motor
is type 0.
Defective motor cable
Defective main drive motor
Paper jams
Go to “Main drive service check”
on page 2-153.
Service error codes (9xx.xx) (continued)
Error
code
Sub
codes
Display text Description Action

Table of Contents

Other manuals for Lexmark X642e

Related product manuals