• JBOD Linear volume
The Disks are congured in series so that they are all being used at once to store
data, as if they were one Disk in summation. The volume’s storage capacity can be
maximized, as the data is stored to the Disks in sequence. Data must not be written
in the event of a damaged Disk to safeguard saving capacity. In this way, if a Disk
is damaged, saved date in the volume will be lost. The storage capacity of the
volume as a whole is the sum of the capacities of all of the Disks. To maximize the
safeguard of capacity of the volume, saving of important data is not recommended.
Appendix A Volume Construction & RAID
Configuration
190
To Next Page
Loading...
