4. LG Network Storage Web Menu Use (for LG
Network Storage administrators)
61
2 Check ‘Enable’ to activate hibernation mode, or ‘Disable’ to deactivate. When selecting
‘Enable’, proceed to the next step.
3 Set wait time.
If there is no data trac during the given time, the LG NETWORK STORAGE will enter
hibernation mode. Time can be set to 30/60/120 minutes.
4 Click on the ‘Apply’ button to dictate changes to the LG NETWORK STORAGE. Click on
the ‘Cancel’ button to discard changes.
Wake On LAN
With Wake on LAN(WOL), you can turn LG Network Storage, whose power is o, from a
compeuter far away by remote-controlling.
x Click on ‘Turn on’ to use WOL function and ‘Turn o’ radio button not to
use it, and then click on ‘Apply’.
x You can start LG Network Storage by sending a magic packet to MAC
address in LG Network Storage, using a WOL tool in the local computer, or by
connecting to a WOL-compatible router.
x You can connect to a WOL-compatible router and start LG-NAS from the
computer at a remote-controlling site.
Power Recovery
When power is supplied to LG-NAS, it gets automatically booted. In the event of a power
failure in LG Network Storage, it will automatically start later when power is supplied
again. To use this function, select ‘Restart automatically’ and click on ‘Apply’.
To Next Page
Loading...
