Operation 4
Special equipment
5
= Problem with steering
6
= Accident damage
7
= User-defined
8
= User-defined
9
= User-defined
The status messages
7
,
8
and
9
can be in-
dividually defined by the user. Pl
ease contact
your fleet manager to discover the
definition of
these state messages.
NOTE
If you notice one of these states (such as a
problem with driving) only after you have input
the state code
0
(vehicle OK), you have to log
off.
¾ Turn the rotary button 2 anticlockwise as far
as it will go.
¾ Log in again with the status messa
ge
3
(problem with driving)
Forklift Data Acquisition - sta
ndard set-
ting (PIN number and state code
)
Log on and start vehicle:
¾ Apply the parking brake.
Operating Instructions – 393 807 1001 EN – 08/2008 77
To Next Page
Loading...
