LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 11
CNT(current working pieces/max working pieces)：when CNC program reads M02, M30 or other M code at the
end, system will sum up working pieces, this function need to use Pr.0089 and PLC to work.
【ABSOLUTE COORDINATE】
Pressing 【ABS.】 to enter into absolute coordinate screen. Details will be shown in bigger words at the upper left
side of the screen. Using the program home (means the workpiece coordinate) to show tool’s current location,
the absolute coordinate will be changed according to the movement of tool. This is called absolute coordinate
Absolute coordinate is the program coordinate, which is [present value – tool offset = program value.]
ABS

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English