LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
16 LNC Technology Co., Ltd.
【HANDLE】
At the auto mode to press【HANDLE】, users can use MPG interruption to increase or decrease the movement
of tool to change the tool path.
Note：Because the absolute coordinate will not be changed by MPG interruption, therefore the tool path later will
have certain offset with original program path. This offset need to be modified by manual return zero to
clear. And about the offset value, you can refer to MPG coordinate.
About this detailed function, you can refer to maintenance manual-MPG interruption signal selection chapter.
（C BITS 066 ~ 071）and MPG rates（REGISTER 014）
ABS
will not change because of MPG interruption to show program coordinate.
REL
will not change because of MPG interruption.
MAC
will change because of MPG interruption to chow exact position of machine.
HANDLE
coordinate

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English