LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 23
 【LDEL】
Able to delete a row of program codes at the cursor position. Note: It can not recover after deleting.
 【MARK】
Pressing【MARK】at the right side of the screen to move the cursor to the wanted marking row’s
starting/ending point. Moving the cursor to the starting/ending position of the wanted marking row and
pressing the【MARK】function key again to mark the designated marking rows. Please refer to the below
figure.
Note: After marking, you can use COPY and LDELET to do multi-line program editing.
 【UNMARK】
To cancel previous marking sign.
Note: If you will not use【MARK】anymore, please use【UNMARK】to prevent mistakes.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English