LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
54 LNC Technology Co., Ltd.
※ Head Parameter：red indicates “un-define” and blue indicates “define”. “Un-define” means users select to
enter into the head parameter screen that never been in before. On the other hand,
“define” means users have been to the head parameter screen. Screen will switch to the
head parameter screen when users press【ENTER】key at this column.
※ Cutting Parameter：red indicates “un-define” and blue indicates “define”. “Un-define” means the cutting
parameter screen that users haven’t been in before. On the other hand, “define” means
users have been to the head parameter screen. Screen will switch to the cutting
parameter screen when users press【ENTER】key at this column.
※ Geometry Define：red indicates “un-define” and blue indicates “define”. “Un-define” means the geometry
define screen that users haven’t been in before. On the other hand, “define” means users
have been to the geometry define screen. Screen will switch to the geometry screen
when users press 【ENTER】 key at this column. Screen will switch to different geometry
setting screens according to different working methods.
【Function Keys at Screen Bottom】
※ PRJ. MNG：switching screen to the project management windows.
※ SAVE：saving the currently opened project.
※ CONVER：switching the currently opened project data to the work path program.
※ CLOSE：closing the currently opened project.
【Function Key at Right of Screen】
※ PROC ADD：adding a new program to the next row of the row where the yellow cursor occurs.
※ PROC INS：insert a new program to the previous row of the row where the yellow cursor occurs.
※ PROC CPY：copy a row of program where the yellow cursor occurs to the next row of the copied row.
※ PROC DEL：delete all procedures where yellow c sor occurs.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English