Installation Guide
Software ports:
3050 10272 10704
10240 10700 10705
10262 10701 10710
10263 10702 10800
10271 10703 10806
Installation steps
1. Put the installation CD in the client computer!
2. Install a Firebird client according to your operation system! The Firebird
client can be found in CD:\Utils\Other\firebird\FB v2.5.2 folder.
3. Create a new folder on the C: drive, called STP! C:\STP\
4. Share the Clients folder on the server computer! Server computer –
C:\Program files (x86)\STP\Clients
5. Map the shared Clients folder on the client computer! Click on Computer
icon on the desktop and use the Map network drive button! Adjust a
Drive letter (X:) and browse the Folder!
6. Create a shortcut for the Control Center on the client computer's
desktop of the AccAlrm.exe which you can find in the shared Clients
folder!
7. Rename the shortcut to Control Center!
8. Right click on the shortcut and select Properties in the popup window!
Complete the Target field with the following: /fileserver
/inifile=”C:\STP\AccAlrm.ini” The result should be like this:
“X:\AccAlrm.exe” /fileserver /inifile=”C:\STP\AccAlrm.ini”
9. Start the Control Center by clicking on the shortcut at the desktop of the
client computer!
10. Adjust the server IP address in the popup window!
41/80
To Next Page
Loading...